How To Fix Sewing Machine

sewing machine - 18 February 2017, By cingiler

How to fix sewing machine

how to pict sewing machine

how to pix sewing machine

OK this time I will discuss on how to rehabilitate a sewing machine correctly and various issues about the happening in the sewing machine, sewing machine when it is not used will be a lot of problems or many constraints when you’re in the running.

The machine will not be forever running seamlessly. Because the machine can also be tired of working, so in need of repair. Similarly with sewing machines, long will find some sort of interference. How to fix a broken sewing machine is usually done by the owner of the sewing machine. But sometimes hired the services of repair of sewing machines. In the sewing machine there is some disruption to search how to fix a sewing machine. Following a few annoyances and how to fix it:

 

  1. the machine is not smoothly and noisy.

The cause of this disorder occurs due to lack of lubrication oils on the sewing machine, in addition the lubricant used is not good quality. The existence of a yarn-a yarn off concerns on the machine and also the buildup of dust and the rest of the fabric fibers on the teeth of the machine.

The solution

Seen from the constraints that happened like this is you please start from cleans the engine of the fibers of the fabric, the dust that clung to Twine and left with a brush brush or something, as long as it can to clean the machine with clean to the sidelines that may be difficult to reach. After that please you provide the lubricating oil on the throat plate (cover teeth) with a good quality lubricant is not the former that is already used, be sure to rub in the lubricating oil correctly, then

 

  1. Yarn stitches up often dashed.

The cause of the disorder among other sewing thread concerns due to sew with the wrong direction. Install the needle is not exactly at the place which causes needles quickly dull or bent so that the yarn tension becomes too great. The yarn is too coarse or too fine which is not in accordance with the type of fabric to be used.

Solutions

Improvement on the disorder can be done by means of:

  1. replace the needle with a good kind, not blunt and accordingly,
  2. adjust the number of threads to the number of needles to be used,
  3. set the return home of lifeboat and loosen the tension by observing the balance with sewing thread bottom,
  4. pull the fabric toward the back of the sewing machine.

 

The next problem that occurs on a sewing machine is

 

  1. sewing thread bottom often break up

The cause of the disorder include: sewing thread is not neatly rolled up on a spool/coil, voltage threads on a lifeboat (bob bin case) is too large, the thread is not a perfect pass by the home of lifeboat, and there is a lot of dust in the mechanism of the machine, there is a buildup of thread on the bobbin because after tailoring,

the solution

Improvement on the disorder can be done by means of:

  1. clean the parts of the mechanism of the machine correctly,
  2. midline lifeboats should be flat overall so the thread passing on directions that should not pass the wrong direction which caused the breakup and broken on the needle,
  3. reduce tension and yarn and adjust the voltage with the upper thread.

 

  1. Thread often break up.

The disorder occurs due to misplaced needles so often about the hook and cause the needle blunt. Needle type does not match the fabric being used. When you are finished sewing the fabric is pulled towards the wrong.

The repair can be done in different ways:

  1. Replace the needles pointy blunt not certainly, the match between the sewing thread, needle and fabric,
  2. Put the needle on the right place,
  3. loosen the tension by observing the balance between the upper and lower thread thread stitches.

Other disorders that cause: improper needle in place, blunt needle, thread size doesn’t match the needles that are used, the top thread is not passing through the right path.

Improvement on the disorder is done by means of:

  1. replace the needle with a sharp and plug in the right place,
  2. Adjust the needles, bengan
  3. Install the thread passes through the line should be.

 

  1. thread the Noose shrinks

The cause of the disorder include: thread tension too strong, the thread is not passing the right path, the needle is too big for the type of fabric and thread being used, the bottom is not rolled up neatly.

The repair can be done with the following steps:

  1. loosen the tension by observing balance with thread stitching,
  2. adjust the upper thread so that the needle passes through the right path,
  3. adjust the number of needles with the materials used.

 

  1. Hook the thread slack.

The cause of the disorder include: the upper thread tension is too loose or too tight, the voltage regulator on a spring home gig is too large, and the size of the needle is not in accordance with the type of fabric.

The repair can be done with:

  1. loosen the tension by observing balance with thread stitching,
  2. adjust the upper thread tension with thread bottom,
  3. adjust between the sewing thread, needles and threads to be used.

 

  1. the operations of the cloth is not smooth.

The cause of the disorder, such as: the large number of fibers gathered around teeth penyuap and high low gear penyuap not sasuai.

The repair can be done in different ways:

  1. clean the teeth part penyuap then give the lubricant and then close it back quickly,
  2. adjust mechanism and dental penyuap knop.

 

So little information about how to fix a sewing machine that I can pass on this day. Although I always hope it will be useful to you.

 

Note

Use a sewing machine correctly so as not to damage the patal damage will cause damage that is permanent.

How To Fix Sewing Machine | cingiler | 4.5

Leave a Reply