Vivo Sewing Machine

sewing machine - 29 May 2017, By cingiler

vivo sewing machine

this picture in vivo sewing machine
don’t have any text to check? don’t have any text to check? Click “Select Samples”.Your stitching machine’s temporal arrangement is crucial to achieving even stitches in your material and making certain that the machine’s components square measure operating in synchronize. though the overall method for adjusting temporal arrangement is that the same for many stitching machines, the tactic of removing, modifying and putting in components is completely different for every machine, thus consult the owner’s manual of your machine as you undergo the stages of checking and fine calibration the temporal arrangement on your machine.

Part 1
Diagnosing the matter
spaceplay / pause
escstop
ffullscreen
shift + ←→slower / quicker (latest Chrome and Safari)
↑↓volume
mmute
←→seek
. ask for to previous
12…6 ask for to 100 percent, 20%, …60%
to regulate household appliance temporal arrangement
1. Check for other potential problems. Check other factors that may masquerade as a timing problem first; there’s no sense in taking your machine apart if you don’t need to!
Be sure that your needle is not bent and that it is inserted completely and screwed down tightly.
Check that your needle, thread weight, and fabric are compatible. A heavier fabric requires a larger needle and thicker thread.
2. Check for a timing issue by performing a timing test. By testing the alignment of the needle and the shuttle hook, you can determine whether your machine needs a timing adjustment. [2]
Leave the needle threaded, but remove the switchplate, base cover(s), and bobbin case.
Turn the hand wheel slowly to ensure that the shuttle hook is smoothly catching the thread. If it does not, you may need to adjust the timing.
Use a ruler to measure the timing settings. Use the hand wheel to put the needle in the lowest position, then raise it 3/32 of an inch. The shuttle hook should meet the needle just above the eye while it is in this position. If it does not, you may need to adjust the timing.

3. Prepare the machine for work. If you have determined that you need to adjust the timing, be sure you are ready to work on your machine.
You may need move the stitch position to a straight stitch, ensuring that the needle descends through the center of the switchplate hole, or you may need to move your needle to the widest zigzag position. talk to your manufacturer’s tips.

If you haven’t already, take away the needlebar cowl, the switchplate, the bobbin, and also the cowl from the bottom of the machine
Gather any tools you will would like, like alittle screwdriver, household appliance oil, and a bright work lightweight.

Part 2
Adjusting the temporal arrangement

1. Set the needlebar height. Most machines have marks on them that indicate the suitable height for the needlebar. Consult your manual for specifics on the way to access and loosen your needle bar.
If temporal arrangement marks square measure gift, loosen the needlebar and slide it up or right down to align the highest temporal arrangement mark just under rock bottom of the temporal arrangement bar bushing.
If temporal arrangement marks aren’t gift, lower the needle utterly with the hand wheel, then raise it 3/32 of an in. (2.4mm). regulate the needle’s height in order that the needle eye is 3/32 of an in. below the purpose of the hook. [4]

spaceplay / pause
escstop
ffullscreen
shift + ←→slower / quicker (latest Chrome and Safari)
↑↓volume
mmute

←→seek
. ask for to previous
12…6 ask for to 100 percent, 20%, …60%

to regulate household appliance temporal arrangement
2. Set the hook temporal arrangement. Adjusting the hook temporal arrangement varies between makers and models. the overall approach, however, is to regulate the gap between the hook and also the needle.
Using the handwheel, lower the needlebar to its lowest position.
Loosen the gears in the base of the machine.
Make adjustments until the hook and needle are an appropriate distance apart, anywhere from 0.04mm to 0.1mm [5] or 0.01-0.16, depending upon the machine
3. Re-Check for timing accuracy. By re-testing the alignment of the needle and the shuttle hook, you can determine whether your adjustments have improved the machine’s settings.
If you removed the thread from the needle, re-thread it. Continue to work with the bobbin area exposed.
Turn the hand wheel slowly to ensure that the shuttle hook is smoothly catching the thread. If the hook catches the thread every time, your timing has been fixed.

Part 3
Reassembling and Testing the Machine
1. Re-assemble your machine. Carefully tighten all screws securely, and be sure there are no “leftover” parts that have not been replaced.
Image titled Adjust Sewing Machine Timing Step 8

2. Clean and oil any exposed gears while your covers are still off.
Remove any lint or debris from gears and feed dogs.
Consult your manual to find the specific areas that require oiling.
Only use sewing machine-specific oil on your sewing machine.

 

3. Replace the covers and switchplate.
Image titled Adjust Sewing Machine Timing Step 10

4.Test your adjustments. Re-thread your machine and sew a test piece of material.
The stitches should be even, with no skipped stitches or broken needles.
If the problem has not resolved, you may need to make further adjustments or consult a vivo sewing machine repair person.

Vivo Sewing Machine | cingiler | 4.5

Leave a Reply